The WPS or the WiFi Protected Setup method is the easiest way to do Comfast extender setup. Due to this, many users prefer using this method to install their networking devices. However, at times, they are unable to do so because of the Comfast extender WPS button not working issue. In case, you are also sadly floating in the same boat, know that there is nothing to worry about. Following the hacks discussed below in this guide will help you to resolve this issue with your Comfast WiFi extender. We can bet on that.
[Solved] Comfast Extender WPS Button Not Working Issue
-
Restart the Comfast Extender
The number one reason why you are experiencing the Comfast extender WPS button not working issue is because of technical glitches. These glitches come unannounced and ruin the performance of a networking device.
In order to get rid of them, you need to restart your wireless range extender. That can be done if you unplug your extender from its wall socket after turning it off, holding on for a couple of seconds, and then, plugging your extender back into its socket and powering it up.
Now, check if the Comfast extender WPS button not working issue has left you for good. By any chance, if you are still losing your breath because of it; it is advised that you walk through the troubleshooting tactics mentioned further in this article.
-
Press the WPS Button
Chances are that you did not press the WPS button on the Comfast wireless range extender during its setup which led to the assumption of the Comfast extender WPS button is not working. Taking this into consideration, you need to press the WPS button on the extender.
Once done, check again if the issue at hand has been resolved or not. In case, it persists, there is a possibility that there is some other reason behind this issue. Well, for that, you need to continue reading. We will help you to figure it out soon. You can trust us with that.
-
Check the Power Supply
A proper power supply is very significant for the functioning of the Comfast wireless range extender. And if that is not happening, then no button located on your networking device will work, let alone the WPS button.
Therefore, ensure that a proper power supply is being supplied to your Comfast extender. For that, you need to ensure that the wall socket to which the extender is connected is not damaged. On the off chance, it is, get it repaired.
Also, if you are using an older version of the extender, then it might have come with a power cable. See to it that it has no damage. In case, this does not work for you, then you need to plug your extender into another electrical source.
-
Get the Extender Checked
Did none of the aforementioned troubleshooting hacks help you to resolve the Comfast extender WPS button not working issue; it is recommended that you get your wireless range extender checked. Chances are that there is something wrong with it.
After following all these tips, consider setting up your networking device using the WPS button. After that, update the extender’s firmware using the Comfast WiFi extender login credentials. Doing so will ensure that you do not get with future technical issues.
Final Words
These were the topmost troubleshooting tips following which you will be able to resolve the Comfast extender WPS button not working issue. We hope that you liked reading this article. If you did, then take our advice and share your feedback with your fellow readers.
In case you are thinking about how to do that, then know that you simply need to make use of the comment section. Just enter what you have to say and hit the Enter key. In a couple of seconds, your comment will become visible to the world. We are anticipating that your fellow readers will like this effort made by you.